CH347 DMA Firmware Flash
Downloads
JTAG Driver: https://www.wch-ic.com/downloads/CH341PAR_EXE.html
CH347Download tool (Firmware Flash): https://github.com/WCHSoftGroup/ch347/tree/main/CH347FPGATool
Power on both PCs to begin the process. Locate a USB 3.0 port or higher on your second PC, as this will provide the optimal connection for setting up your DMA hardware. Use this USB port to connect to the JTAG port of your DMA card. For detailed guidance, refer to the instructional video below. Please note that all steps shown in the video should be performed exclusively on the second PC during the DMA setup process.
If successful, go onto the PC that the DMA card is installed into and open up device manager.
In this example, we used our firmware based on a “TP-Link” network card. Depending on the firmware you use, your device may not show up as a network card.