Kmbox Net Setup

This guide will walk you through the necessary steps to ensure the proper setup and functionality of the KMbox-net. It will cover everything from the physical wiring required to connect the device to the specific Windows settings that need to be configured.

Kmbox Net Setup

This guide will walk you through the necessary steps to ensure the proper setup and functionality of the KMbox-net. It will cover everything from the physical wiring required to connect the device to the specific Windows settings that need to be configured.

Using the included USB cables (not shown), connect your two computers to the KMbox-net as demonstrated in the image above. If you haven’t already, make sure both computers are powered on.

Windows IPv4 setting

Follow the below video that covers the needed IPv4 settings for windows. These settings are changed on the 2nd PC.

  • If your KMbox IP is 192.168.2.188 then your interface IP on your second PC must be between 192.168.2.1 and 192.168.2.254 but it cannot be the same as the KMbox IP (192.168.2.188). Only the last number (octet) changes.
  • For the subnet mask, put 255.255.255.0.

Complete